Clevo Notebook User Manual Download Page 148

Page: 148 / 151

G - 7

PC Card - See PCMCIA Card.

PCMCIA Card - A credit-card sized, removable module for portable computers

standardized by PCMCIA. Also known as PC Cards, they are 16-bit devices that

are used to attach modems, network adapters, sound cards, radio transceivers,

solid state disks and hard disks to a portable computer. The PC Card is a “plug

and play” device, which is configured automatically by the Card Services soft-

ware

PCMCIA is an acronym for Personal Computer Memory Card International

Association which is an international standards body and trade association that

was founded to establish a standard for connecting peripherals to portable com-

puters.

peripheral - Any external device attached to a computer, such as a printer,

disk drive, display monitor, etc..

Plug and Play - The ability to add a new component and have it work without

having to perform any technical analysis or procedure.

PnP - see Plug and Play

POST (Power On Self Test) - A series of built-in diagnostics that are performed

when the computer is booted.

RAM (Random Access Memory) - The memory available to programs, different

Summary of Contents for Notebook
























































































































































Search results

Summary of Contents for Notebook

Reviews:

Related manuals for Notebook

Brands by name

Popular brands

Clevo Notebook, User Manual

Search results

Summary of Contents for Notebook

Reviews:

Related manuals for Notebook

Brands by name

Popular brands