manualshive.com logo in svg

Clevo N870, User Manual

Share
Download
Clevo N870 User Manual Download Page 8

VI

Preface

IMPORTANT SAFETY INSTRUCTIONS

Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock, and injury
to persons when using any electrical equipment:

1.

Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet 

basement or near a swimming pool.

2.

Avoid using this equipment with a telephone line (other than a cordless type) during an electrical storm. There 
may be a remote risk of electrical shock from lightning.

3.

Do not use the telephone to report a gas leak in the vicinity of the leak.

4.

Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may 
explode. Check with local codes for possible special disposal instructions.

5.

This product is intended to be supplied by a Listed Power Unit:

•

Full Range AC/DC Adapter – AC in 100 - 240V, 50 - 60Hz DC Output 19.5V, 6.15A (

120 Watts

) minimum

Summary of Contents for N870



































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands