Clevo N870 User Manual Download Page 223

Page: 223 / 290

Control Center & Flexikey®

Overview B - 7

Backlight Keyboard (Device)

Click the numbers

under the Backlight Keyboard icon to

TouchPad/Camera (Device)

Click either of these buttons
to toggle the TouchPad or camera module’s power status. The icon will appear dimmed when it is off

Note that

the power status of the camera module is also effected by the

Power Mode

selected (see

Table B - 1, on page B

- 3

Caps Lock/Scroll Lock/ Number Lock/Airplane Mode

Click the button

to toggle the appropriate lock mode and Airplane Mode.

Left Windows Key (Gaming)

Click

Disable

to disable the Windows Key on the left side of the keyboard. This may be useful if you are using

the gaming keys (

W, A, S & D

) and wish to avoid accidentally triggering menus with the Windows Key.

Flexikey® (Gaming)

Click the button to access the

Flexikey®

application.

Summary of Contents for N870



































































































































































































































































































Search results

Summary of Contents for N870

Reviews:

Clevo N870, User Manual, Page: 223 / 290

Search results

Summary of Contents for N870

Reviews: