manualshive.com logo in svg

Clevo N870, User Manual

Share
Download
Clevo N870 User Manual Download Page 215

Interface (Ports & Jacks)

Interface (Ports & Jacks) A - 3

A

Microphone-In Jack

Plug an external microphone in to this jack to record on your computer.

Mini DisplayPort 1.2

The Mini DisplayPorts are a miniatuarized version of the DisplayPort, which is a digital display
interface standard that allows a digital audio/video interconnect, between the computer and its
external display or a home-theater system.

RJ-45 LAN Jack

This port supports LAN (Network) functions.

Note

: Broadband (e.g. ADSL) modems usually connect to the LAN port.

Security Lock Slot

To  prevent  possible  theft, a Kensington-type lock can be attached to this slot. Locks can be
purchased at any computer store.

Item

Description

Mini DisplayPort Cables

When using cables connected to the Mini DisplayPort, 

try to make sure that the cables are not bent

excessively

, as bending the cables may cause signal problems.

Summary of Contents for N870



































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands