Clevo N130WU User Manual Download Page 218

Page: 218 / 248

Control Center

B - 8 Control Center

Figure B - 4

- Display Utility - Advanced Settings

Click

Save

to retain the settings, and you will then need to sign out of the computer, and sign back in again, to

adjust the settings.

Note that you must save any open files and close open programs before signing out in

order not to lose any work

Any changes made to the individual text size items are linked to the overall

DPI Scaling

selected. If you change

the

DPI scaling

, the customized text size changes will become grayed out and will only become available again

after you have signed out of the computer, and signed back in again.

The

System Program

will display an arrow icon

at the bottom right of the menu which you can click to allow

you to access the second page of the menu.

Summary of Contents for N130WU

























































































































































































































































Search results

Summary of Contents for N130WU

Reviews:

Brands by name

Popular brands

Clevo N130WU, User Manual

Search results

Summary of Contents for N130WU

Reviews:

Brands by name

Popular brands