manualshive.com logo in svg

Clevo N130WU, User Manual

Share
Download
Clevo N130WU User Manual Download Page 176

Modules & Options

6 - 48 3G/4G Module

6

3G/4G Module SIM Card Installation

Insert the SIM card 

 as illustrated below (pay careful attention to the orientation

of the card as the gold contact side of the card should face downwards) until it clicks
fully into position. To eject the card simply press it until it ejects, but do not attempt
to eject the card while connected to a 3G/4G network (see below). 

SIM Card 

Orientation

Note that the USIM
card’s readable side
(with the gold-colored
contacts) should face
downwards as illustrat-
ed.

Figure 6 - 38

USIM Card Insertion

1

1

SIM Card Ejection

Simply press on the SIM card to eject it, however do not do this while a connection is in
progress.

If you do eject the card while a 3G/4G connection is ongoing, you will need to shut down
the system, reinsert the SIM card, restart the system and then reestablish the 3G/4G con-
nection.

If you wish to change SIM cards then you will need to shut the system down, reinsert the
SIM card, restart the system and then reestablish the 3G/4G connection.

Summary of Contents for N130WU

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands