12
English
Tilting the Screen
It is possible to tilt the LCD screen in order to get the best
possible viewing angle of the screen without glare etc.
1.
Place one hand at the top of the computer
, and use the
other to open the stand
to
an angle of around 15 degrees
from the vertical position
(the stand will allow you to adjust to
the appropriate angle if you pull it out and let it spring back).
Figure 7 - Adjust the Stand
2.
Apply pressure with one hand at the top (at point
) of the
computer (while holding on to the side with the other hand) to
carefully push the LCD screen down in order to tilt it to the
appropriate viewing angle (
up to 50 degrees from the vertical
position
).
3.
Use one hand at the top of the computer (while holding on to
the side with the other hand) to move the computer back to the
original position.
Figure 8 - Tilting the Screen
1
2
Adjust the stand to
tilt the computer to
15° from the vertical
position.
15°
1
2
3
DVD Operation
Note that although the com-
puter may be tilted up to an
angle of 50 degrees from
the vertical position, the
DVD-ROM drive will only
work (i.e continue to spin
and read DVDs) up until an
angle of around 35 degrees
from the vertical position.
If you have any problems
with the system reading
DVDs, adjust the tillt angle
accordingly.
Apply pressure
from the top of
the screen to ad-
just the stand
outwards (up to
50° from the ver-
tical position).
50°
50°
3
Summary of Contents for A110EU
Page 1: ......
