NPM User Manual
18
DEVICE
View all the connected devices and corresponding serial number
SYSTEM
on, update time, MAC
View the system information e.g software versi
code, CPU occupancy rate, operation time
NETWORK
address, sub-net mask, default
View the network configuration e.g IP
gateway, main DNS and back up DNS
SNMP
View the SNMP configuration information
SSH
View the SSH on/off status and port configuration
TELNET
n
View the TELNET on/off status and port configuratio
HTTP
View the HTTP on/off status and port configuration
and password,
receive address, carbon copy address, interval of alarm
View the e-mail alarm setting, e.g POP3 server address, SMTP server
address, e-mail sending port, e-mail sender's address
ONINTERVAL
【
】
View the power on interval of this
【
ADDRESS
】
ADDRESS
OUTPUTS
【
ADDRESS
】
View the output name and address information of this
【
ADDRESS
】
ALL
g and time of power on/off of all output of this
View time settin
【
ADDRESS
】
TIMING
【
ADDRESS
】
NO.
】
, "NO" means outlet number, input one outlet
View time setting and time of power on/off of this individual output of
this
【
ADDRESS
number at a time.
For instance: SHOW USER: view user information and level.
AY, DNS1, DNS2, HTTP, TELNET, SSH,
D, TIMIGN, ONNTERVAL of the device.
ay, DNS1 and DNS2
k IP address: 192.168.1.163
etwork configuration will be valid after reboot.
6)
SET
"SET" command line can configure and control the IP, SUBNET, GATEW
SNMP, MAIL, THRESHOL
A. Network configuration
Network configuration include: IP address, Sub-net mask, Gatew
Command line input format: SET
【
Network configuration
】
=
For instance: SEG IP=192.168.1.163: configuration networ
Note:
the n
B. HTTP