![background image](http://html1.mh-extra.com/html/clever/npm-3100/npm-3100_user-manual_2623266014.webp)
NPM User Manual
16)
Logout
14
ssage to close the software system interface`
e the output port name, view the device and sensor status, receive alarm information
translating and editing success, the details information of device
1). The status of the device
software, details as below:
Figure 2-1 the information table of device output status
Figure 2-2 the information ta
us
Description
of
menu
According to the prompt me
2.2.
SNMP Access Method
SNMP(Simple Network Management Protocol), this software support the V2 version of SNMP with a MIB file
which contain an enterprise number, network management system offer network management of device through
SNMP, the user can chang
through SNMP approach.
The user has to open the SNMP access method through visiting interface of IE browser, please refer to the 13
th
item
of IE access method SNMP introduction. Install corresponding SNMP management software after completing the
SNMP start setting, set up the configuration according to the software menu provided by SNMP software company,
leading-in MIB file on the SNMP management platform, user can monitor and manage the device status
information and alarm Trap information after
status are as detailed in figure 2-1, figure 2-2,
and sensor can be read through the table format of SNMP
Menu Description
of
menu
XX output ID
ame, output ID display the device ID address
XX stands for device n
Name
The output end name
Status The
corresponding
switch
on/off status of each output
Load Value
The corresponding current of each output
Load Low limit
The corresponding minimum value of each output
Load High limit
The corresponding maximum value of each output
ble of device sensor stat
Menu
Device name
Display the connected device name
Device Type
Display the connected device model
Series No
Display the current hardware device series number
ON Interval
The interval of power on
Total Load Value
Display the total output load current