NPM User Manual
9
ce is made up of three parts: the system information interface
、
user guide menu and the
er name and function menu, it helps and guides the user complete the operation
or
、
control and manage the devices through the device control interface.,
as below 1
)
to 16):
tch on/off of the each outlet and look over the status of outlets and basic
below:
as the current of individual outlet. The digit of current in red will
ws the switch on/off status of outlets:
input the incorrect user name or password for three times consecutively.
The administration interfa
device control interface.
The system information interface: mainly contain the company Logo as well as the device current IP address;
User guide menu: display the us
conveniently and promptly;
Device control interface: the user can monit
please see the details
1)
Device Control
"Device Control" interface control the swi
information of sensors, details as
a)
to view the model of device;
b)
"output Name" display the name of each outlet;
c)
"current" display the total load current as well
flash when it's over the limiting value to alarm
d)
"Output Status" sho
means on, means off, means problem
ice and its default status was "NONE", the user can switch on/off single outlet, multiple-outlet
consumption can be read if the device equipped with power consumption meter. If not, it will display
ad if
e equipped. If not, it will display "Not found". The digit in red will flash if the sensors alarm.
Temperature/Humidity sensor is connected. The digital figures in red will flash if it's over the
d" means no door sensors are connected. The word
occurred to the outlet;
e)
"Control" controls the switch on/off: "ON" means switch on, "OFF" means switch off, "REBOOT" means
restarting the dev
or all outlets;
f)
The load current can be read if the device equipped with ampere meter. If not, it will display" Not found"
g)
The power
"Not found"
h)
The corresponding value and status of temperature, humidity, smoke, water logging and door open can be re
all this sensors ar
2)
Sensor Status
View the current status of all these sensors. Details as below:
a)
"Temperature/Humidity" displays the current temperature/humidity sensor connection status and value. "Not
found" means no
value to alarm.
b)
"Door" displays the connection status of door. "Not foun
"open" in red on the screen will flash if the door is opened.