9
Disassembling Discharge Plunger
1.
Remove the Black & White air tubes from Discharge
valve.
2.
Undo 2” Sani-clamp and remove Discharge valve by
sliding it upward until the plunger is out.
3.
Using a wooden or plastic picker, remove “O” rings
from plunger.
4.
Place all “O” rings and gaskets in warm water to soak.
Disassembling Product cylinder
1.
Pull product cylinder off product piston. Do not use
pliers or any other tool that could damage the inside
wall of the cylinder.
2.
Using a wooden or plastic picker, remove “O” ring
from Product Piston.
3.
Clean all parts, except Discharge valve and Rotary
Actuator, with warm soapy water or run them through
the dishwasher.
4.
Clean the interior of all pipes and food hose using the
brushes provided.
5.
Inspect “O” rings and gaskets for any damage,
replace if necessary.
6.
Leave parts overnight to dry.
Flapper
Flapper Valve
"O" Ring
Spring
Rotary
Actuator
Shaft
Piston Head
Product
Cylinder
Push
Pin
Air Cylinder
Product Piston
Product Piston "O" Ring
Disassembling Pump head
1.
Remove the Black & White air tubes from the Rotary
actuator.
2.
Unscrew lug nuts using lug wrench to remove the
Pump head.
3.
Push Rotary actuator in to remove Flapper.
4.
Pull out Rotary actuator, remove the spring and “O” ring.