24
Option 2: reset to default settings
Press button 2 until the illuminated ring lights up blue.
Release the button.
The illuminated ring flashes 2x blue to confirm the reset.
Factory setting Temperature
Flow
Illuminated ring
Pre-set 1:
36
o
C,
100%
Yellow/orange
Pre-set 2:
37
o
C,
100%
Yellow/orange
Pre-set 3:
38
o
C,
100%
Yellow/orange
9 Cleaning instructions
General cleaning instructions
Clean the bathtub on a regular basis. The frequency of cleaning depends
on how often the bath is used.
Only use soft, non-abrasive soap or a liquid cleaner without alcohol.
Never use cleaner containing chlorine. Chlorine can damage the
aluminium and chrome parts in the cabin.
Surface care instructions
Acrylic products are very easy to clean and service. Hardly any soiling
remains on the smooth surface. A soft sponge or soft cloth and a few
drops of antistatic cleaning agent are recommended for daily cleaning.
This restores the gloss of the aluminium and creates a dirt - repelling
effect.
Remove more persistant soiling with a liquid domestic cleaner or soapy
water (follow dilution guidelines).
Calcium
Remove calcification with a citric based cleaning agent, rinse with clear
water and polish with a cloth.
Damage caused by incorrect handling is not covered by our guarantee.
Easyfill
Use the cleaning mode of the Easyfill to prevent accidental activation of
the buttons during cleaning.
