21
8.1 Basic operations
There are 3 pre-sets for temperature and flow.
Factory settings
Illuminated ring
Pre-set 1: 36
o
C, 100% flow
Yellow/orange
Pre-set 2: 37
o
C, 100% flow
Yellow/orange
Pre-set 3: 38
o
C, 100% flow
Yellow/orange
Note: the Easyfill automatically stops the water flow after 45 minutes.
Press button 2
briefly to fill the bathtub.
1x briefly for pre-set 1
2x briefly for pre-set 2
3x briefly for pre-set 3
The illuminated ring will flash the colour corresponding to the chosen pre -
set, the flashing stops when the correct water temperature is reached.
During the filling of the bathtub the following operations can be
performed.
Turn button 1
to increase / decrease the flow
Turn button 2
to increase / decrease the water
temperature.
The illuminated ring will flash the colour
corresponding to the chosen water
temperature, the flashing stops when the
correct water temperature is reached.
Push button 1
briefly to switch between the Exafill and the
handshower.
Push button 2
briefly to switch off the water flow.
