CLEOPATRA Cleo Steam Brain, Installation Manual

Page: 21 / 40

21
4
Saw parts that stick out. Use a multitool for this.
5 Insert a tension spring into a cable tube of a sensor. There is now a
connection between the steam generator and the cabin. Connect the cable
end of a sensor to the tension spring and use the tension spring to gently pull
the cable into the tube.
If the cable with sensor still sticks about 30 cm outside of the wall, cover the
back of the sensor with silicone sealant. Pull the last remaining cable into the
tube and press the sensor into place. Remove the excess sealant.