7
* Special function must be activated
Press & hold
knob 1 until LED color ring is fl as-
hing BLUE. Release knob immediately.
Flashing 2 × BLUE: Factory setting restored.
Troubleshooting if LED color ring is NOT
illuminating:
Please check the cable connection between
TLC Controller and Interface. If you were
unable to resolve the issue, please contact
Support Center.
Special functions
Changing between activation / locking device
press & hold
knob 1 until LED color ring is
fl ashing TURQUOISE.
Release knob immediately.
Press & hold
knob 1 until LED color ring is
fl ashing TURQUOISE.
Release knob immediately.
Flashing 1 × TURQUOISE:
Special functions activated
Flashing 2 × TURQUOISE:
Special functions locked
Press & hold
knob 1 until LED color ring is
fl ashing TURQUOISE.
Release knob immediately.
Flashing RED: Flushing with hot water
Stop disinfection
Run disinfection
Press 1 ×
knob 1 or wait 5 minutes
(automatic stop)
Thermal disinfection *
ATTENTION: RISK OF SCALDING!
Factory setting *
Functions are depending on the controller used.
