Clemas & Co i-mop Lite, Operator'S Manual, Page: 42 / 58

Operating manual
imop lite
1.01
– 2019 D
43
unsuitable spare parts
- Always replace self-locking screws and nuts
- Use spare parts that are contained in the spare
parts list only
unauthorized/premature
approval of the equipment
Do not approve the machine for use without
functioning safety devices
8.2 Maintenance of the machine
This contains find general information regarding which the maintenance work must be
performed on the machine at appropriate intervals.
Important
When folding the removing or fitting the cleaning brushes
or pads to the machine, always keep one hand up on the
shaft to prevent it from falling over/tipping.
8.2.1 General repair procedure
Step Activity Explanation/illustration
1 Stopping and turning off the machine See Section 5.5
“Stopping and
turning off the machine
”
2 Putting the machine into the parking
position so you can reach the
cleaning brushes or pads unhindered See Section 5.2
“Putting the
machine into the parking position
”
3 Removing the battery from the
machine See Section 5.3
“Charging the
machine
’s battery”
4 Removing and emptying the liquid
container See 5.6
“Removing/inserting the
liquid container
”
5 Detach the suction filter See Section 5.7
“Removing/inserting the suction
filter
”
6 Detaching the squeegee and
removing the cleaning brushes
or pads See Section 5.8
“Fit the machine
with cleaning brushes or pads
”
7 Removing the suction hose waste
water Figure 24
8 Cleaning and rinsing the hose,
filter and squeegee Cleaning the hose, filter and
squeegee under running water