
Operating manual
imop lite
32
1.01
– 2019 D
Step
Activity
Explanation/illustration
2
Turn the machine off
This is done by choosing the
operating mode
5.6
Removing/inserting the liquid container
The liquid container may only be removed after the machine has been stopped. Both of
the liquid containers are removed and inserted in a corresponding way.
Important
Do not tilt the container too much when removing it as this
may damage the tank inlet.
Removing/inserting the liquid container:
Step
Activity
Explanation/illustration
1
Stopping and turning off the
machine
See Section 5.5
2
Putting the machine into the parking
position
See Section 5.2
machine into the parking position
3
Removing the liquid container
Releasing the liquid container
from the magnet holder by tilting it
slightly and then lifting it from the
machine. Figure 19
4
Inserting the liquid container
Inserting the liquid container by
following these steps in reverse
order
Summary of Contents for i-mop Lite
