Clemas & Co i-mop Lite, Operator'S Manual, Page: 30 / 58

Operating manual
imop lite
1.01
– 2019 D
31
5.4 Turning the machine on
Warning Please observe the safety instructions!
You may only switch the machine on after observing the
aforementioned instructions.
Please also observe the safety instructions (see Section 2
“Safety instructions”).
Preparing for start up
•
Check that the power adapter is disconnected from the battery.
•
Check that the battery has a sufficient level of charge.
Turning the machine on:
Step Activity Explanation/illustration
1 Setting the operating mode Choose the mode you want using
the buttons of the operating unit
at the top of the shaft.
2 Turning the machine on: This can be done by pressing the
lever on the left or right handle of
the shaft
3 Checking the wear limit of the
brushes or pads The brushes or pads must still
have a certain remaining
thickness, otherwise the driver
may come into contact with the
ground
3 Checking and correcting the levels of
the liquid container
- Level of the cleaning fluid in
the fresh water container
- Level of the waste water
container
5.5 Stopping and turning off the machine
Stopping and turning off the machine:
Step Activity Explanation/illustration
1 Stopping the machine This can be done by letting go of
the lever on the left and right
handle of the shaft