Clek Q-Tether, Manual

Page: 8 / 16

Step 5
Press and hold Q-Tether
Adjuster and pull out on
Q-Tether Strap until Strap
reaches full length as
shown in
Figure 10.
Option 2: If Q-Tether Adjuster
is on correct side of Splitter
Plate:
• Attach loop at end
of Q-Tether Strap by
sliding looped end into
slot in Splitter Plate as
shown in
Figure 8.
• Remove one loop at
end of Q-Tether Strap
from Splitter Plate
by sliding strap out
through slot in Splitter
Plate as shown in
Figure 9.
Figure 10
Figure 9
Figure 8