Cleco P2182BA/EN, Instruction Manual

Page: 16 / 20

16 P2182BA/EN 2015-11
2182b-en_1-11.fm, 04.11.2015
Troubleshooting
6
5.3 Level 2 – Unlimited Access level
5.3.1 Copy contents of transducer
Procedure: see 5.2.1 Copy contents of transducer, page 13
5.3.2 Unlimited editing of transducer contents, resetting of Counter Display
Procedure: see 5.2.2 Restricted editing of transducer contents, page 15
6 Troubleshooting
7 Service
NOTE
In the event of repairs, send the complete interface to Sales & Service Center! Repairs may only be carried
out by authorized personnel. If the interface is opened, the warranty will become void.
 Edit the transducer data (data
highlighted green).
 Confirm with <OK>.
 Use <Write to transducer> to
accept the changed values in
the transducer.
c01
312e
n.p
n
g

Use <Counter Reset> to reset
the Counter Display.
c01
313e
n.p
n
g
Error Cause Measure
Timeout while reading
COM… Wrong port  Test out all ports.
 Check the plug connection.
 Power adapter not connected.
 Transducer defective.
Port not available COM… Port not available

Check USB cable connection.

Check COM numbering and adapt if necessary
(see Windows device manager).