Cleco P2182BA/EN, Instruction Manual

Page: 11 / 20

2182b-en_1-11.fm, 04.11.2015
P2182BA/EN 2015-11 11
Functionalities
5
4.5 Settings
5 Functionalities
Depending on the installed activation code, the following functionalities are possible:
 Boot the < Transducer Inter-
face application software.
 Select <Settings>.
c012
87en.
pn
g
 Select language.

Select one of the installed
interfaces via which the trans-
ducer can be addressed. The
numbering of port connec-
tions ('Part ID Sources') is
specified by Windows and
may vary.
• Do not change the remaining
parameters!
 Back up these settings by
pressing <OK>.
 Select <Show license>.
c012
88en
.pn
g
Under Modules the S erial num-
ber and the installed Activation
code are displayed.
 Select the <Activation code>
and then install any additional
activation codes you may
require.

End the installation by press-
ing <Close>.
c01
289en
.p
ng