34
P2544PM | 2021-02
Apex Tool Group
3
EN
3.8.7
Torque calibration value
This menu is only available in the FastApps mode. In the mPro mode, the menu is hidden.
In
Torque calibration value
, the torque calibration value of the tool can be adjusted. This may be necessary
if the torque of the tool changes due to wear.
>
Fig. 3-30: Menu – Torque calibration value
To change the torque calibration value:
1. Activate the input box with the
button.
2. Increase/decrease the torque calibration value with the
und
buttons. Enter each digit of the
value individually. As soon as a digit is confirmed, it is stored.
3. To exit the menu, press and hold the
button.
Button
Description
Display of the torque calibration value.
The tool constant can be changed by
± 20%.
Display of the static torque constant [Nm/A].
The value serves as a starting point for further current/torque conversion calculations.
38.80
38.40
