Page 11
TM12-1105-LG1
08/25/2017
EN
Maintenance
Implement a comprehensive safety maintenance program
to provide regular inspection for all phases of tool operation
and air supply equipment.
Daily:
→ Visual inspection of all cables and connections
→ Visual inspection of all external tool components
→ Check the tool for excessive vibration or unusual noises
Approximately 100,000 Rundowns:
→ Inspect the tool cable for damage or wear
→ Inspect the tool cable connection for a secure fit
→ Inspect the output spindle for damage or wear
→ Verify the maximum free speed
Approximately 500,000 Rundowns:
→ Disassemble the tool and inspect all parts for damage or
wear and replace as necessary
→ Clean and lubricate the angle head, gearing, and motor
bearings
→ If equipped; recalibrate the transducer
Approximately 1,000,000 Rundowns:
→ Disassemble the tool and inspect all parts for damage or
wear and replace as necessary
→ Clean and lubricate the angle head, gearing, and motor
bearings
→ If equipped; recalibrate the transducer
Lubricants
Application of the assembly tool determines how frequently
it is greased. All gearing should receive a generous amount
of grease during each service interval.
Part No.
Packaged
Grease
540395
2 oz. (0.06 kg)
Magnalube-G
513156
16 oz. (0.45 kg)
Magnalube-G
541444
2 oz. (0.06 kg)
Rheolube 363AX-1
541445
16 oz. (0.45 kg)
Rheolube 363AX-1
Summary of Contents for 48EAE105AH4
