Cleco 17BP, Instruction Manual

Page: 24 / 64

24 P1890E/EN 2017-06
2291c-enu_LCD_bedingt.fm, 25.08.2017
LCD display
8
Additional messages in "Linking" mode
Linking display, if this is programmed in the job, here link position 1 of 16 for WK-ID
0ZZ89999.
First line: The next position to be fastened.
Second line: Number of positions.
Third line: Number of repetitions at this position in case of an NOK rundown.
Linking has been canceled without a batch result.
Not all of the positions in the tightening group have been programmed.

Check the Application and Tightening group selected on the control to determine
whether the tool settings and process programming have been carried out.
Linking result OK.
Linking result NOK.
Linking disabled.
 Synchronize the tool with the control once again.
Wait for end of transmission.
 Synchronize the tool with the control once again.
P 1/16
0ZZ899
99
N.Pos1
of 3
Rpl 0
Linkin
No
Result
Linking
OK
Linking
NOK
Linkin
locked
Synch
Linkin
No
Job