cleasby FIBERGLASS Series, Instruction Manual

Page: 92 / 112

Cleasby Conveyors Hydraulic Stabilizers
Cleasby Conveyors (Rev. 08/14/12) | Page 6-2
Installing Stabilizer Legs and Cylinders
1.) Connect the stabilizer legs to the stabilizer
frame (See Figure 6-1, this page and Parts List,
beginning hereafter) with straight 1"x 7 1/4 “ pins.
Place washers on each end of the pins and secure
with cotter pins.
2.) Mount a stabilizer foot on each stabilizer leg
with headed 1"x7" pins. Place a washer over the end
of each of the pins and secure with cotter pins.
3.) Anchor the tube end of the cylinders to the
stabilizer frame with the cylinder pins and secure
with the hardened cotter pins provided.
4.) Connect the rod ends of the cylinders to the
stabilizer legs with cylinder pins and secure with the
hardened cotter pins provided.