ClearWater Lights Dixie, Installation Manual

Page: 3 / 12

Page 3
Step 1: Parts List & Bike Preparation
Note: Motorcycle needs to be running before the lights will function.
Bike Preparation:
• First, park the motorcycle on hard pavement or concrete to insure the bike
will be stable during the installation. Put the motorcycle on a center-stand
with tie-down straps, this will help secure the motorcycle.
• Follow the manufacturers guidelines for disconnecting the battery. This
is important to prevent damage to the electrical system.
Page 2
Introducing the new Dixi, Clearwater Lights’ most powerful (consumer) light yet!
This light consists of two separate light sets built into one housing. They are avail-
able in single unit sets or as a pair.
Dixi’s center light is similar to, but more powerful than, Darla. This light utilizes
a new control circuit that provides 3,300 lumens at the highest setting. It is a
driving pattern light, incorporating 75% of the light in a 15-degree cone, with the
remaining 25% in a 45-degree cone. The purpose of this center light is twofold.
It is a conspicuity light that can be adjusted with either our CANopener system
or our rotary controller. It is also a powerful motorcycle beam light that covers a
wide path with visible light, making you more noticeable to other motorists. The
outer light is a long-range driving light similar to Sevina, providing a 7,000-lumen
spot light that utilizes only 70 watts. With Dixi, you essentially get a Sevina and an
even more powerful Darla in one housing, providing 10,000 lumens on the high-
est setting!
Each light can be controlled separately, or as a group. Most applications will opt
for the controllable Darla center and a FULL POWER Sevina on high beam.