ClearView PhoenixPlus-08 User Manual Download Page 30

Page: 30 / 270

Forward

Various forward speeds and

normal speed playback.

Slow play

Multiple slow play speeds or

normal playback.

Next record

In playback mode, playback the

next video.

Previous record

In playback mode, playback the

previous video.

Play/Pause

In pause mode, click this button

to realize normal playback.

In normal playback click this

button to pause playback.

In real-time monitor mode, click

this button to enter video search

menu.

Reverse/pause

Reverse playback pause mode,

click this button to realize normal

playback.

In reverse playback click this

button to pause playback.

Esc.

Go back to previous menu or

cancel current operation (close

upper interface or control)

Record

Start or stop record manually

In record interface, working with

the direction buttons to select the

record channel.

Click this button for at least 1.5

seconds, system can go to the

Manual Record interface.

Direction keys

Switch current activated control,

go to left or right.

In playback mode, it is to control

the playback process bar.

Aux function(such as switch the

PTZ menu)

Enter /menu key

go to default button

go to the menu

Multiple-window switch

Switch between multiple-window

and one-window.

In 1-ch monitor mode: pop up

assistant function

：

PTZ control

and Video color.

Switch the PTZ control menu in

PTZ control interface.

Summary of Contents for PhoenixPlus-08















































































































































































































































































Search results

Summary of Contents for PhoenixPlus-08

Reviews:

Brands by name

Popular brands

ClearView PhoenixPlus-08, User Manual

Search results

Summary of Contents for PhoenixPlus-08

Reviews:

Brands by name

Popular brands