ClearView IP-93A, Operation Manual

Page: 132 / 139

2
Solution 4: Check if the application program of IPC is corresponding to the model, and check if N/P
format program is correct.
Solution 5: Check if the control and WEB are correct, there is control running permission under WIN7,
you can delete the control under C:\Program Files\webrec and eliminate IE buffer memory
to reload control and WEB. Please run IE as administrator for WIN 7, you need to install
QuickTime plug-in if it is non-IE browser.
,WGLVSOD\Vಯ5HVRXUFHVDUHOLPLWHGIDLOHGWRRSHQYLGHRರDIWHU,ORJLQWKH
,3&
Solution 1: Network bandwidth is not enough; change a switcher with bigger bandwidth.
Solution 2: Too many users logging in, and it is beyond the device code stream output capacity.
Solution 3: Disconnect the network or restart the device repeatedly, see 1.1 for more details.
7KHYLGHRZLQGRZRIFRQWUROLQVWDOODWLRQGLVSOD\Vಯ ರZKHQ,ORJLQ
WKH,3&
Solution 1: IE permission setting is not correct, add IPC IP as trusted sites.
Solution 2: Set IE
“Internet
Option > Security > Custom Level > Active X control and plug-in
”
all
enabled.
Solution 3: You need to log in IPC as an administrator in WIN 7 system for the first time.