ClearView IP-93A, Operation Manual

Page: 41 / 139

37
The video bit stream interface is shown as below. See Figure 5-7.
Figure 5-7
Please refer to the following sheet for detailed information.
Parameter Function
Sub Stream Enable
Please check the box here to enable extra stream
function.
This function is enabled by default.
Code-Stream Type
ACF means using different fps to record.
There are two options: VBR and CBR.
Please note you can set video quality in VBR mode.
Note:
WEB interfaces don’t support motion detect and alarm
code stream setting.
Encode mode
There are five options: H.264 (main profile standard,
H.264H (high profile standard), H.264B (Baseline
Profile), H.265 (main profile standard) and MJPG
encode.

The H.264, H.264H both are H264 bit stream.
H.264 is the Main Profile encode and you need to
enable the sub stream function in your camera and
set the resolution as CIF. Then you can monitor via
the Blackberry cell phone.

The H.265 is the main profile encode mode.

MJPEG: In this encode mode, the video needs to
large bit stream to guarantee the video definition.
You can use the max bit stream value in the
recommend bit to get the better video output effect.