ClearView 834IP71, Quick Start Manual

Page: 84 / 130

17
Parameter Function
I Frame Here you can set the P frame amount between two I
frames. The value ranges from 1 to 150. Default value
is 50.
Recommended value is frame rate *2.
4.1.2.2 Snapshot
The snapshot interface is shown as in Figure 4-3.
Figure 4-3
Please refer to the following sheet for detailed information.
Parameter Function
Snapshot type
There are two modes: general (schedule) and Event
(activation).
Image size It is the same with the resolution of the main stream.
Quality
It is to set the image quality. There are six levels.
Interval
It is to set snapshot frequency. The value ranges from 1s to 7s.
4.1.2.3 Video Overlay
The video overlay interface is shown as in Figure 4-4.