ClearView 834IP71, Quick Start Manual

Page: 108 / 130

41
Parameter Function
Alarm Delay
System can delay the alarm output for specified time after alarm
ended. The value ranges from 10s to 300s.
Record
Channel System auto activates motion detection channel to record once
alarm occurs (working with motion detection function). Please
note you need to go to Storage-> Schedule to set current channel
as general record.
Record Delay System can delay the record for specified time after alarm ended.
The value ranges from 10s to 300s.
Send Email If you enabled this function, System can send out email to alert
you when alarm occurs and ends.
PTZ
z
Here you can set PTZ movement when alarm occurs. Such as
go to preset x when there is an alarm.
z
The event type includes: preset, tour and pattern.
Snapshot You need to input capture channel number so that system can
backup motion detection snapshot file.
4.3.2.2 Relay output
The relay output interface is shown as in Figure 4-26.
Figure 4-26
Please refer to the following sheet for detailed information.
Parameter Function
Alarm output There is only one output channel. Please click the button 1. If you
want to enable the alarm activation output function, please press
the corresponding button and then trigger.
Refresh
Search alarm output status.