SQUARE THE ASSEMBLED FRAME
1. Perform a final square
of the structure by measuring
diagonally (corner to corner), and verify that the two
measurements are equal. Adjust the frame if
needed.
2. Examine the framework and remove any sharp
edges from the frame or reposition screws so they
do not come in contact with the main cover (if
equipped).
3. After the framework is squared, read or reread the
MUST READ
document and anchor the framework
in place.
The framework assembly is now complete. The
assembled frame
must be
anchored
before
the final
bracing and main cover are installed.
ANCHOR THE FRAME
At this point in the assembly process, anchor the
assembled frame. Once the frame assembly is anchored
properly, continue with these instructions.
WARNING:
Securing the base rails to concrete blocks or
wood boards set on the site is not a substitute for
properly anchoring the shelter. You must anchor the
shelter as described in the MUST READ document.
FAILING TO PROPERLY ANCHOR THE SHELTER
WILL RESULT IN DAMAGE TO THE SHELTER AND
CAN CAUSE PERSONAL INJURY.
READ THE MUST READ DOCUMENT TO PROPERLY
ANCHOR THE SHELTER.
The diagrams below illustrate two possible ways to
properly anchor the shelter to the site.
The parts shown in the diagrams regarding anchor
systems are not included with the shelter. Contact
Customer Service at 1-800-245-9881 to purchase
additional parts to anchor the shelter.
ATTENTION:
After
anchoring the shelter frame, install
the diagonal bracing.
Anchoring System for
use on concrete
Ground Anchoring
System
Visit www.ClearSpan.com for additional products and customer assistance.
13 of 22
