I
nstallatIon
G
uIde
5
F
oot
s
tand
a
ssemBly
(d
ual
m
onItor
)
Caution
»
: The feet are installed with the monitors face-down. Make sure the face
of both monitors rest on a soft, non-abrasive surface to prevent any damage to the
monitor screens. Also, due to the weight of the monitor, make sure a team of two or
more people are available when moving the desktop monitor to prevent personal
injury or damage to the product.
Follow the procedures for attaching the feet for the Console and Display as described on
1.
page 3, step 1.
Review the port locations on page 2 and make the appropriate cable connections as well as
2.
the DVI-I and USB cables shown below.
While the two monitors are still face-down, install the Collaborate Soundbar as described on
3.
page 3, step 3. With a dual system, the soundbar can be mounted to either the Console or
Display or can be placed on the table for positioning as needed.
Carefully stand the two monitors upright then plug the Wireless Keyboard and Mouse
4.
receiver into a PC USB port.
Clip the camera to the top of the Console then plug the camera into a USB port located
5.
along the bottom of the Collaborate Console as shown below. Open camera lens cover by
turning ring.
*Console shown with optional Camera Bezel.