8
t
echnIcal
s
upport
: 800.283.5936
W
all
-m
ount
a
ssemBly
(s
InGle
m
onItor
)
Install the TV Wall Mount Kit as specified by the manufacturers documentation onto the
1.
intended wall location.
Place the Collaborate Console face-down on a flat, clean, soft, non-abrasive surface and
2.
attach the Collaborate Wall Mount Bracket onto the appropriate mounting holes on the back
of the Collaborate unit (Refer to the manufacturers TV Wall Mount Kit documentation for
appropriate bracket hole locations.)
Review port locations on page 2 and make the appropriate cable connections keeping in
3.
mind that some connections may need to be completed after the unit is mounted to the
wall.
While the unit is still face-down, install the Collaborate Soundbar as shown below using the
4.
Long Soundbar Mounting Bracket with the screws provided and those on the soundbar
as shown. Then connect the soundbar cables (See Collaborate port locations for speaker
cable connections on page 2 of this manual.) The unit may need to be repositioned to pro-
vide adequate room for mounting the soundbar.
*Product shown with optional Camera Bezel.
3 mm