21
YOURx Multi-Purpose Terminal
__________________________________________________________
Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected]
Manual 021023 REV A - Jan 2020
Grounding
To ground the terminal, a ground stud will be threaded into one of the holes
used to secure the gasket plate onto the base of the MPT.
1.
Insert the ground stud into the hole and hand tighten.
Tighten a pair of nuts together on the ground stud a good distance away
from the beginning of the threaded insert.
2.
3.
Using these nuts and a wrench, begin to turn the ground stud, which will
start to push through the base of the terminal.
Continue turning the stud until it has punched through the base to the other
side.
4.
5.
Remove the ground stud by backing it out.
Clean up the resulting hole on the top of the MPT base with a knife or
de-burring tool, being careful to retain the threads created in the plastic of
the base.
6.
7.
