Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected]
16
YOURx Multi-Purpose Terminal
Installation Manual
_________________________________________________________
Manual 021023 REV A - Jan 2020
Locate the fiber assembly that was ordered for the terminal. Remove
the twist ties from the fibers, and save both halves for later.
Note:
Fiber test record will be included. Place onto splice tray cover
for future use.
Splicing Pre-Connectorized Fiber Pigtails
1.
Splice each of these fibers to the assigned incoming fiber. Place the
splice sleeves into the splice chip.
Note: Slice chip carries a maximum of 12 sleeves (6 slots, 2 sleeves
per slot).
Store the 250 micron fiber back into the tray.
2.
3.
Route the 900 micron fiber down and around the bottom of the tray,
and out of the top of the terminal. Install the splice tray cover, allowing
the 900 micron fiber to exit the gap in the splice tray cover.
4.
