manualshive.com logo in svg

Clearfield FieldSmart FxMP, Installation Manual

Share
Download
Clearfield FieldSmart FxMP Installation Manual Download Page 19

19

FieldSmart

®

 FxMP Panel & Standard Frame

__________________________________________________________

Installation Manual

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected] 

Manual 019807 REV A - June 2018

Routing Ribbon Fiber

The High Density Ribbon Breakout Kit and Ribbon Fanout Kit are both used to protect bare ribbon on a frame before the 

fibers enter the protection of a panel body or cassette. The High Density Ribbon Breakout Kit allows the user to breakout a 

high fiber count cable (864 fibers max) into manageable 144 fiber groups that can be further broken down with the use of 

the Ribbon Fanout Kit. Each Ribbon Fanout Kit breaks out ribbon stacks (max 12 ribbons) of 250 um fibers (max 12 fibers 

per ribbon) into color-coded breakout tubes. The breakout tubes with individual ribbons can then be routed to your cassettes 

and secured into the tray like a buffer tube.

The High Density Ribbon Breakout Kit can also accommodate a breakout of a 1728 SpiderWeb Ribbon cable. This will be 

used in conjunction with the round Ribbon Fanout Kit (P/N FMA-MZZ-ROUND) which can hold 24 fibers (2 subunits of 12 

fibers) each.

Note:

 The installation manuals for both products are shipped with the kits. Examples shown below.

High Density Ribbon 

Breakout Kit

Ribbon 

Fanout Kit

Kits During 

Installation 

Completed 

Installation 

Summary of Contents for FieldSmart FxMP






































Reviews:

No comments

Brands by name

Popular brands

Load more brands