User manual / Bedienungsanleitung
Made in Germany
5
3. Modes of operation
3.1 Output/off mode
The output/off mode is characterized by:
1. The output is deactivated.
2.
The LED ring of the button is off.
Note: I n this mode, if the battery is discharged, unit will start charging the battery
automatically.
3.2 Battery output mode
The battery output mode is characterized by:
1. The output is activated.
2.
The LED ring is constantly on (not flashing).
3.3 Charging mode
The activated charging mode can be identified by the blinking LED ring of the button.
Please note:
The charging mode can be activated in every operation mode.
I f the unit becomes completely discharged,
smart power 12V
will automatically switch to charging
mode.
When in battery mode, a long press (approx. 3 seconds) will manually start the charging or top up
process.
The LED ring confirms the activated charging mode by flashing.
Depending on the remaining charge of the integrated NiMh batteries, charging time may vary.
When the battery is fully charged, charging mode will switch off automatically.
To manually stop the charging process, long press (approx. 3 seconds) the button again.
The LED ring will shine constantly.
Please note:
Unit will take up to 30 seconds to completely start or stop the charging process.
