User manual / Bedienungsanleitung
6
© clearaudio
electronic GmbH, 2021-03
4. Operating information
• As long as a load is connected to the
smart power 12V
and the remaining charge level is sufficient
for operation of the connected device there will be no charging.
• A reduction of the output voltage of up to 4V between two charging cycles is normal.
Crucial for the correct speed of the turntable is a noise free current and not the absolute value.
This is ensured by battery-buffering and a special, linear regulation in the turntable.
•
Switching off
the unit is done using the power switch on the rear side of the
smart power 12V
.
• By turning the knob on the back, the light of the LED ring on the front can be dimmed in all
operating modes (see Pic.1, red mark).
Please note:
To prevent overheating of electronic parts never cover or put anything on top of the
smart power 12V
.
Do not dispose the unit in the domestic waste.
Do not expose the
smart power 12V
to a temperature above 40° Celsius.
Clearaudio electronic GmbH
Spardorferstraße 150
91054 Erlangen
Germany
Phone: + 49 9131 40300100
Fax: + 49 9131 40300119
www.clearaudio.de
www.analogshop.de
Pic. 1:
Rear view
