CLEARjet GmbH
CX-one
Please find detailed descriptions for printer commands in the CX-one Programmer’s
Manual. The controlling of the contact chip interface depends on the used chip/tag and
built-in module. Please find details in the specific Manual of the contact chip module.
The Active CX SDK (software development kit) includes an ActiveX package for
controlling the CHIP CM1 module as well as a programmer's manual with detailed
information about programming the CHIP CM1 encoding module.
5.3 RF Chip Encoding
5.3.1 General Information
The RF chip encoding module of the CX-one makes it possible to read and write chip
card information as well as print onto and erase the TRW surface of the card all in one
operating cycle. Several modules for encoding a wide variety of chips/tags are
available.
Module ISO
Standard
Tag
RF 14443
ISO 14443 AB
Mifare Standard 1k / 4k; Mifare Ultralight
RF 15693
ISO 15693
I-Code SL2, Tag-it HF-I
RF 125 kHz
EM 4050 / 4150, EM 4002 / 4102
Note:
Not all standards define the antennas inside of the smart cards. Smart cards therefore
are produced with varying antenna sizes, positions and HF characteristics. Because of
the installation situation in the printer this may cause functional problems in some
cases. To avoid problems we recommend in any case testing the function of the
systems with original cards from your application!
5.3.2 Possible Installations
RF Chip Encoding Standard:
•
Chip read/write for RF chips/Tags (on request)
•
Card feeding from the front
•
Controlling by 'RS 232' or 'USB' possible
RF Chip Encoding Through Transport:
•
Chip read/write for RF chips/tags (on request)
•
Card feeding from the front or from back side (hopper) possible
•
Controlling by 'RS 232' or 'USB' possible
User Manual
page 33 / 40
