CLEARjet GmbH
CX-one
4.2 Adjusting the Print Energy
To tailor the power setting to different card materials, use DIP-Switches 2 and 3 (see
4.1). Choose the switch settings according to the used TRW material.
WARNING:
An energy setting that is too high can damage the card surface!
4.3 Adjusting the Erase Energy
To adapt the erase energy to different card materials, use DIP switches 4 and 5 (see
4.1). Choose the switch settings according to the used TRW material.
WARNING:
The erase function will not work if the erase energy is set incorrectly. An energy
setting that is too high leads to a ‘speckling’ of the cards. An energy setting that
is too low means that text/graphics will not be fully erased.
4.4 Test Mode
To switch to test mode, set DIP-Switch S 7 to ON. In this mode, cards inserted into the
printer are automatically printed with test images. These images are designed to help
you test and evaluate print quality and device function.
4.5 Loading New Firmware
DIP-Switch S 8 allows you to load new firmware. For a more detailed description of this
function, see the Manual 'CLEARjet Utility’.
User Manual
page 29 / 40
