CLEARjet GmbH
CX-one
CX-one User Manual
Last Edition:
June 2004
Copyright CLEARjet GmbH 2004
Editor:
Zirl
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any
form or by any means, electronic, mechanical, photocopying, recording, translation or otherwise, without prior
permission in writing.
Liability Statement
This CLEARjet product has been built in accordance with the ISO 9001standard. CLEARjet GmbH makes no claims
regarding this product, its commercial quality or its suitability for any particular task.
Please note and heed the WARNING and CAUTION labels that have been placed on the equipment for your safety.
Please do not attempt to operate or repair this equipment without adequate training. Any use, operation or repair in
contravention of this document is at your own risk. By acceptance of this system you hereby assume all liability
consequent to your use or misuse of this equipment. CLEARjet GmbH assumes no liability for incidental, special or
consequential damage of any kind. Equipment specifications, applications and options are subject to change at the
sole discretion of CLEARjet GmbH without notice.
Safety
All CLEARjet products are built in accordance with strict safety and reliability specifications. The following basic
safety tips are given to ensure safe installation, operation and maintenance of CLEARjet equipment and are not to be
considered as comprehensive on all matters of safety.
•
Connect equipment to a grounded facility power source. Do not defeat or bypass the ground lead.
•
Place the equipment on a stable surface (table) and ensure floors in the work area are dry and non-slip.
Insulated rubber floor mats are preferred.
•
Know the location of equipment branch circuit interrupters or circuit breakers and how to turn them on and
off in case of emergency.
•
Know the location of fire extinguishers and how to use them. ABC type extinguishers may be used on
electrical fires.
•
Know local procedures for first aid and emergency assistance at the customer facility.
•
Use adequate lighting at the equipment location.
•
Maintain the recommended temperature and humidity ranges at the equipment location.
•
Use proper lifting techniques when moving or installing the equipment.
•
Use standard electrostatic discharge (ESD) precautions when working on or near electrical circuits.
•
Do not defeat or disconnect safety interlocks on covers. Operate the printer with the cover closed.
Conformity Regulations
This equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance
with this instruction manual, it may interfere with radio communications. We confirm that the CX-one complies with
the requirements of the EM Directive 89/336/EEC. This equipment has been tested and found to be within the limits
for Class A, pursuant to norm EN55022. This product is equipped with reasonable protection against radio
interference. Operation of this equipment may possibly cause interference. In the event of interference, the user, at
their own expense, will be required to take whatever measures are necessary to correct the problem.
Notice to Users of Printers Equipped with a Contactless Smart Card Coupler
The contactless smart card coupler emits radio-frequency waves and must be used as installed and recommended
by CLEARjet. You may not modify the coupler or how it is used without the written permission of CLEARjet. You may
not operate the printer after modifying the coupler or its method of operation.
Trademarks
•
Microsoft, Windows, Windows NT are trademarks or registered trademarks of Microsoft Corporation.
•
CLEARjet is a trademark or registered trademark of CLEARjet GmbH, Grambach, Austria.
•
All other trademarks are the property of their respective owners.
CLEARjet GmbH
http://www.clearjet.com
Schloss Spielerhof
Hauptstrasse 12
A-8071 Grambach / AUSTRIA
User Manual
page 2 / 40
