CLEARjet GmbH
CX-one
3.3 Self-cleaning Mode
The CX-one printer has an automatic self-cleaning mode which allows cleaning without
opening the device.
Automatic pollution detection:
The printer automatically detects pollution and necessary cleaning (number of
printed/erased cards).
If cleaning is necessary the signal ‘CLEAN’ (flashing red LED + short beep sound)
is activated.
In this state normal printer function is maintained, but we recommend soon cleaning.
After detecting a CLEARjet Cleaning card the printer automatically performs a cleaning
procedure and the signal ‘CLEAN’ is cleared.
With the aid of the CLEARjet Cleaning card, the print head, erase module, transport
rollers and card guides are all automatically cleaned.
3.3.1 CLEARjet Cleaning Card
CLEARjet Cleaning cards are designed in such a way that they are automatically
recognised by the CX-one upon insertion. These Cleaning cards are impregnated with a
cleaning agent that is designed specifically for the special requirements of the printer.
CLEARjet Cleaning Card:
•
The CLEARjet Cleaning card is made for one-time use.
•
In case of strong pollution it is acceptable to repeat the cleaning cycle, but do not
use the same card more than 3 times.
•
The CLEARjet Cleaning card is impregnated with a special cleaning agent that is
spent during cleaning cycle. Thus the cleaning effect of the card is reduced when
using it several times. Especially dry Cleaning cards may cause additional
contamination of the printer mechanism, and have no cleaning effect.
•
The Cleaning cards must not be put in the card stack of the CX-one Hopper.
WARNING:
•
Do not use unapproved cleaning agents. Unapproved cleaning agents may
damage the device.
•
Imminent danger of explosion and fire when using flammable cleaning
agents.
User Manual
page 21 / 40
