background image

Vitec Group Communications

RLY-6 Interface Instruction Manual

i i

Figure 1: Safety Symbols

EMC AND SAFETY

The GPI-6 General Purpose Inputs Interface meets all relevant CE 
and FCC specifications set out below:

EN55103-1 Electromagnetic compatibility. Product family 
standard for audio, video, audio-visual, and entertainment 
lighting control apparatus for professional use. Part 1: 
Emissions.

EN55103-2 Electromagnetic compatibility. Product family 
standard for audio, video, audio-visual, and entertainment 
lighting control apparatus for professional use. Part 2: Immunity.

And thereby compliance with the requirement of Electromagnetic 
Compatibility Directive 2004/108/EC and Low Voltage Directive 
2006/95/EC

This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions: (1) this device may not 
cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause 
undesired operation.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol alerts you to the presence of uninsulated dangerous
voltage within the product's enclosure that might be of sufficient 
magnitude to constitute a risk of electric shock. Do not open 
the product's case. 

This symbol informs you that important operating and main-
tenance instructions are included in the literature accompanying
this product. 

Summary of Contents for RLY-6



















Reviews: