background image

Vitec Group Communications

RLY-6 Interface Instruction Manual 

i

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with 

the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) that 

produce heat.

9. Only use attachments/accessories specified by the manufacturer.
10. Use only with the cart, stand, tripod, bracket, or table specified by 

the manufacturer, or sold with the apparatus. When a cart is used, 

use caution when moving the cart/apparatus combination to avoid 

injury from tip-over.

11. Unplug this apparatus during lightning storms or when unused for 

long periods of time.

12. Refer all servicing to qualified service personnel. Servicing is 

required when the apparatus has been damaged in any way, such 

as power-supply cord or plug is damaged, liquid has been spilled 

or objects have fallen into the apparatus, the apparatus has been 

exposed to rain or moisture, does not operate normally, or has 

been dropped.

13.

WARNING:

 To reduce the risk of fire or electric shock, do not 

expose this product to rain or moisture.

Please familiarize yourself with the safety symbols in Figure 1. 
When you see these symbols on this product, they warn you of 
the potential danger of electric shock if the station is used 
improperly. They also refer you to important operating and 
maintenance instructions in the manual. 

Please read and follow these 

instructions before operating 

this product. 

Summary of Contents for RLY-6



















Reviews: