4.3.2 Checking the CPU Card installation
The following lights indicate that the card has been properly installed in the matrix:
Figure 6: CPU card lights
Tip:
Once the CPU card has initialized, you can use the Eng button to request frame
information (such as the software version and the current IP address). For more information,
see 5.5
RESET
+5V
+3.3V
OK
IPC
MASTER
LAN A
LAN B
IN SYNC
SI
CONFIG
ENG
RESET
The two
power supplies
are
lit green to indicate that they
are working.
Dot matrix display
indicates
which of the four stored
configurations is currently
operational. The configuration
number displays for a short
time after power up (2s) or
when the configuration is
selected.
OK LED
flashes green
(
1:1 1Hz
)
to indicate that the
CPU software is working.
Master LED
is lit green on
whichever CPU card is
currently serving as master.
IPC (Interprocessor
communication) LED
is lit
green to indicate that the two
CPU cards (primary and
backup) are exchanging
information.
LAN LEDs
(
A
and
B
) are lit
green to indicate connection
with LAN port(s).
When multiple Eclipse HX
matrices are connected
together, the
IN SYNC LED
is
lit to indicate that the matrices
are connected and
synchronized.
SI LED
flashes
green (1:1 1Hz)
to indicate communications
activity.
34
Eclipse HX-Median User Guide
Summary of Contents for Eclipse HX-Omega
Page 1: ...Eclipse HX Median User Guide PN 399G060 Rev A 08 22 13...
Page 8: ...8 Eclipse HX Median User Guide...
Page 16: ...Figure 2 Eclipse HX Median front panel C B D A 16 Eclipse HX Median User Guide...
Page 18: ...Figure 3 Eclipse HX Median rear panel A B C D E 18 Eclipse HX Median User Guide...
