background image

10

8-2. Installation Example of the Water Purifier (Softener)

Considering the connecting ranges and maintainability ,select appropriate installment style from 3 choices (A

C).

A Vertical installation

C Horizontal installation

B Wall-mounted

Install the tube outer body upright
on the flat place with the
mounting frame.

Prop up the lid for outer tube with
the frame plate, and the outer tube
with the mounting frame.

Install horizontal with the frame
plate and mounting frame. It is
appropriate for small space.

Like as the above illustration,

fasten the “OUT”side nipple,
plate, and frame plate with
the fixing nuts, and set the
outer tube body to the
mounting frame.

Install the mounting
frame with screws and
fixing nuts firmly, and
set the outer tube body
to the mounting frame.

More than 

100 mm

More than 

100 mm

A

B

C

For strength protection of outer tube body, the fixing nuts, plate and frame plate should be set while you use this
system.

Please handle the cartridge carefully.

MP02-5E and MP02-6E cannot be used in
horizontal position.

Set the water purifier
(softener) to the
mounting frame. The
purifier (softener) should
be touching the floor as
the appropriate position.

Keep the space more than 100 mm from
the floor for cartridge replacement.

Keep the space more than 100 mm from
the side wall or back wall for cartridge
replacement.

8-1. Plumbing

Connect “T” joint with a nut and water main, and

dedicated stop valve for water purifier (softener).

Dedicated stop valve for water purifier (softener) is a
necessity for after-maintenance (adjustment of filtered water
flow amount, and cartridge exchange etc.).

Dedicated faucet for water filtered (softener) should be used
only for purified (softened) water in plumbing.

Attention

For maintenance, the length of pressure-resistant blade hose or
flexible pipe is should not be too long (less than 1 metre). If the
length of pressure-resistant blade hose is too long, loop it at a
moderate pace. Then, pay attention not to break the pressureresistant
blade hose especially.

Dedicated stop valve for
water purifier (softener)

Water main

“T” joint
with a nut

Pressure-resistant blade
hose or flexible pipe

Summary of Contents for MP02-1E












Reviews: