EN
32
Cleaning the Motor Filters
The motor
fi
lters are situated in the vacuum cleaner unit, under the dust container.
The motor
fi
lters should be cleaned regularly to ensure that the suction power of your
vacuum cleaner does not diminish and the motor is not overloaded.
1. Hold down the release button on the handle of the dust
container and detach the dust container from the vacuum
cleaner.
2. Remove the small motor
fi
lter (C).
3. Tap the small motor
fi
lter out over an open dustbin. If nec-
essary, you can rinse the
fi
lter with clear, cold water.
4. Then allow the
fi
lter to dry completely before you insert
it again.
5. To remove the large motor
fi
lter, you must
fi
rst open the
fi
lter
fl
ap (D).
6. The large motor
fi
lter is situated directly beneath the
fi
lter
fl
ap. Remove the large motor
fi
lter.
7. Tap the large motor
fi
lter out over an open dustbin. If nec-
essary, you can rinse the
fi
lter with clear, cold water.
8. Then allow the
fi
lter to dry completely before you insert it again.
9. Close the
fi
lter
fl
ap.
10. Insert the dust container back into the vacuum cleaner.
The dust container must be heard to engage in place.
C
D
07504_DE-EN-FR-NL_A5_V1.indb 32
07504_DE-EN-FR-NL_A5_V1.indb 32
18.08.2015 15:52:04
18.08.2015 15:52:04
