20
Emptying the Dust Container
1. Hold the device over an open dustbin.
2. Press the release button to open the dust container. The
bottom of the dust container will open and the dirt will fall out.
3. Then
fl
ip the dust container
fl
ap closed again. The fastener
must be heard to engage in place.
4. If necessary, you can rinse the dust container with clear,
lukewarm water. To do this, remove the dust container
from the device (see the „Cleaning the HEPA Filter“
chapter).
Cleaning the HEPA Filter
1. Remove the
fl
oor or tile nozzle as de-
scribed in the chapter “Connecting
the Crevice Nozzle / Brush Vacuum
Floor Nozzle”.
2. Turn the dust bin slightly to the left to
remove it from the main unit.
3. Pull out the dust
fi
lter insert together
with the HEPA
fi
lter.
4. Take the HEPA
fi
lter out of the dust
fi
lter insert
5. Tap out the HEPA
fi
lter.
6. If necessary, thoroughly rinse the HEPA
fi
lter and the dust
fi
lter insert with clear,
lukewarm water. CAUTION: Do not under any circumstances clean the
fi
lter in a wa-
shing machine or dishwasher! Then shake off any excess water and let the
fi
lter and
the
fi
lter protective frame dry completely in the air before you insert them both again.
7. Place the HEPA
fi
lter back onto the dust
fi
lter insert.
8. Insert the dust
fi
lter insert together with the HEPA
fi
lter back into the dust container
and turn it tight.
9. Then place the dust container back into the device. Make sure that the dust contai-
ner locks in place correctly.
Cleaning the Brush nozzle
1. To make it easy to clean the brush nozzle, you can open
the nozzle: Open the dust compartment on the bottom of
the nozzle by pushing both hooks in.
