16
Prior to first use
❐
Keep children away from the packaging. There is, among other
things, a danger of suffocation!
❐
Unpack the device and the accessories. Using the list of product contents (see
“Product contents and device overview” section), check the contents for complete-
ness and possible transport damage.
❐
Should you identify any transport damages, please promptly contact our customer
service department (see section “Customer service”).
Start-up
1. Insert the mains plug in an installed, 230 V earthed socket and which has been installed in
compliance with regulations.
2.
Set the device on a mattress, bed sheet or blanket in a flat position and turn the control knob
to the desired position (I, II or III).
I: Vacuum cleaner function only (you can vacuum up surface dirt)
II: Vacuum cleaner and UV-C light function (the UV-C light kills bacteria that the
vacuum cleaner vacuums up)
III: Vacuum cleaner, UV-C lights, and vibration function (the vibration stirs up dust
mites and bacteria making it easier to vacuum them up)
3. Move the device evenly over the surface.
❐
To clean pillows and smaller areas, move the device back and forth
for best results.
4. To turn off the vacuum cleaner, turn the control knob back to position 0.
Clean both sides of mattresses.
You should clean new mattresses once a month.
When you start cleaning with the device, you should clean older mattresses once a
week and then also once a month.
Cleaning/changing the dust bin and filter
❐
Before cleaning/changing, pull the plug out of the socket and let
the device cool off.
1. Reach into the recess over the dust bin and pull the dust bin up and out of the vacuum
cleaner.
2.
Pull the dust filter in the opening out of the dust bin.
3. Empty the dust bin.
4.
Remove dirt from the dust filter and if necessary, clean it under running water.
02274_DE-GB-FR-NL_V2.indd 16
09.03.10 10:00
